SLS Detector Package 4.1.0 released on 04.10.2019 (Minor Release)
=================================================================


This document describes the differences between 4.1.0 and 4.0.2 releases.   
    
    CONTENTS
    --------
    1.  Topics Concerning
    2.  Resolved Issues
    3.  Known Issues
    4.  Firmware Requirements
    5.  Download, Documentation & Support
    


1. Topics Concerning
====================

    - software for eiger quad hardware integrated
    - command line framesl, cyclesl was printing in float (jungfrau, gotthard)
    - eiger interrupt subframe flag
    - eiger server reg command (+0x100 for left and +0x200 for right)
    - additional eiger parameters included i master file



2. Resolved Issues
==================          

    Client
    ------
    
    1.  Command line quad integrates Eiger quad hardware
    
    2.  Command line commands framesl, cyclesl, fatesl, problesl and nframes was 
        printing the result in decimals. It is now fixed to print as whole numbers.
    

    Detector Server (Eiger)
    -----------------------

    1.  Command line quad integrates Eiger quad hardware

    2.  Control flag to set last subframe to be interrupted depending on subexptime.
        By default, it is disabled and will wait till the last sub frame has finished
        exposing.

    3.  Left and Right FEB registers accessed independently using addr (+0x100 and +0x200)
        respectively.


    Receiver
    --------

    1.  Command line quad integrates Eiger quad hardware
    
    2.  Master file has additional parameters for Eiger (Quad Enable, Gap Pixels Enable).
        Writer version update to 4.0.
    
    3.  Zmq Json Header has additional informaion



3. Known Issues
===============
    
    
    
4. Firmware Requirements
========================

        Gotthard
        ========   
        Minimum compatible version  : 11.01.2013
        Latest compatible version   : 08.02.2018 (50um and 25um Master)
                                      09.02.2018 (25 um Slave) 
        Eiger
        =====  
        Minimum compatible version  : 24
        Latest compatible version   : 24
        
        Jungfrau
        ========       
        Minimum compatible version  : 26.02.2018
        Latest compatible version   : 06.12.2018

        
        Detector Upgrade
        ================
        Gotthard    Cannot be upgraded remotely. Requires programming via USB blaster
        Eiger       Can be upgraded remotely via bit files
        Jungfrau    Can be upgraded remotely using sls_detector_put programfpga <pof>
        
        Instructions available at
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorInstall/GOTTHARD_Firmware.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorInstall/EIGER_Firmware.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorInstall/JUNGFRAU_Firmware.html

         
    Please refer to the link below for more details on the firmware versions.
    https://www.psi.ch/en/detectors/firmware
    
    
        
5. Download, Documentation & Support
====================================

    Download
    --------
    
    The Source Code (Default C++ API):
         https://github.com/slsdetectorgroup/slsDetectorPackage
         
    The Conda Lib Package:
        https://github.com/slsdetectorgroup/sls_detector_lib
        
    The Conda GUI Package:
        https://github.com/slsdetectorgroup/sls_detector_gui    
        
    The Python Interface (including the package):
        https://github.com/slsdetectorgroup/sls_detector
    
    
    Documentation
    -------------
    
    Manual (HTML & PDF):
        https://www.psi.ch/en/detectors/documentation
        slsDetectorPackage/manual/docs/
        
    Command Line Documentation:
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorClientDocs/index.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/pdf/slsDetectorClientDocs.pdf

        manual/docs/html/slsDetectorClientDocs/index.html
        manual/docs/pdf/slsDetectorClientDocs.pdf
        
    C++ API Documentation:
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/html/slsDetectorUsersDocs/index.html
        https://slsdetectorgroup.github.io/slsDetectorPackage/docs/pdf/slsDetectorUsersDocs.pdf

        manual/docs/html/slsDetectorUsersDocs/index.html
        manual/docs/pdf/slsDetectorUsersDocs.pdf
        
    C++ API Example:
        https://slsdetectorgroup.github.io/slsDetectorPackage/exampleCode/slsDetectorUsersExample/index.html

        manual/manual-api/mainClient.cpp
        manual/manual-api/mainReceiver.cpp
        
    Python API Documentation:
        https://slsdetectorgroup.github.io/sls_detector/

    TroubleShotting:
        https://www.psi.ch/en/detectors/troubleshooting
        
    Further Documentation:
        https://www.psi.ch/en/detectors/users-support
        
    
    Support
    -------

        dhanya.thattil@psi.ch
        erik.frojdh@psi.ch
        anna.bergamaschi@psi.ch